Related Manuals for Extreme Networks ExtremeMobility AP460i
Summary of Contents for Extreme Networks ExtremeMobility AP460i
- Page 1 ExtremeMobility AP460i/e Outdoor Access Points Installation Guide 9036418-00 Rev AA Published November 2019...
- Page 2 Copyright © 2019 Extreme Networks, Inc. All rights reserved. Legal Notice Extreme Networks, Inc. reserves the right to make changes in specifications and other information contained in this document and its website without prior notice. The reader should in all cases consult representatives of Extreme Networks to determine whether any such changes have been made.
-
Page 3: Table Of Contents
Brazil Anatel Statement..............................41 Hazardous Substances..............................41 Supplement to Product Instructions.........................42 NCC Statement..................................42 CE Information..................................42 European Waste Electrical and Electronic Equipment (WEEE) Notice..........43 Declaration of Conformity in Languages of the European Community..........44 Index............................47 ExtremeMobility AP460i/e Outdoor Access Points... -
Page 4: Preface
(+). Example: Press [Ctrl]+[Alt]+[Del] Words in italicized type Italics emphasize a point or denote new terms at the place where they are defined in the text. Italics are also used when referring to publication titles. ExtremeMobility AP460i/e Outdoor Access Points... -
Page 5: Providing Feedback To Us
Providing Feedback to Us Quality is our first concern at Extreme Networks, and we have made every effort to ensure the accuracy and completeness of this document. We are always striving to improve our documentation and help you work better, so we want to hear from you! We welcome all feedback but especially want to know about: •... -
Page 6: Documentation And Training
Hardware/Software Compatibility Matrices https://www.extremenetworks.com/support/compatibility-matrices/ White papers, data sheets, case studies, https://www.extremenetworks.com/resources/ and other product resources Training Extreme Networks offers product training courses, both online and in person, as well as specialized certifications. For more information, visit www.extremenetworks.com/education/. ExtremeMobility AP460i/e Outdoor Access Points... -
Page 7: Chapter 1: Ap460I/E Overview
Eight WiFi internal/external antennas • One BLE internal antenna on AP460i • One BLE external antenna port on AP460e • Temperature: -40°C to +60°C (-40°F to +140°F) @ 6000 ft. • Enclosure: Plastic with metal base ExtremeMobility AP460i/e Outdoor Access Points... - Page 8 AP460i/e Overview Figure 1: AP460i access point front view Callout Description Console port and reset button cap GE1-PoE Gore vent ExtremeMobility AP460i/e Outdoor Access Points...
-
Page 9: Led Indicators
For information on the AP460e antenna connectors, see antenna configuration for external antenna model access point. LED Indicators There are seven LEDs located on the front face of the access point but are not visibly marked. ExtremeMobility AP460i/e Outdoor Access Points... - Page 10 Normal operational status Amber Non-operational status Amber 100Mbps Green 1000Mbps Purple 2.5G Amber 100Mbps Green 1000Mbps Radio 1 Green 2.4G activity Radio 2 Amber 5G activity Radio 3 White Sensor activity Blue BLE is enabled ExtremeMobility AP460i/e Outdoor Access Points...
-
Page 11: Access Point Purchase Order Information
Domain: US, Puerto Rico, and Colombia AP460e-WR Dual/Tri Radio 802.11ax/ac/abgn, 4x4:4 MIMO outdoor external antenna access point. Domain: EMEA and Rest Of World AP460e-CAN Dual/Tri Radio 802.11ax/ac/abgn, 4x4:4 MIMO outdoor external antenna access point. Domain: Canada ExtremeMobility AP460i/e Outdoor Access Points... -
Page 12: Chapter 2: Install The Access Point
One star washer Access Point Mounting Options, Brackets, and Accessories The AP460i/e access points are mounted on a flat surface such as a wall or to a pole, which are described in the following table: ExtremeMobility AP460i/e Outdoor Access Points... - Page 13 The band must be 1/2” (12.7mm) wide. WS-MBV-VMM Vehicle None Bracket (#32216); comes with fours parts Note All brackets and accessories are sold separately. ExtremeMobility AP460i/e Outdoor Access Points...
-
Page 14: Position The Access Point Before Installation
The KT-147407-02 bracket has three bracket parts; flat part, 1-axis tilt part, and the pole part. For this installation, you require the flat part and the 1-axis tilt part. Figure 4: KT-147407-02 bracket flat part ExtremeMobility AP460i/e Outdoor Access Points... - Page 15 Tilt Part, and the KT- 150173-01 Extension Arm In installations that require an extension arm, the access point is attached to a flat surface using the KT-147407-02 bracket parts and the KT-150173-01 extension arm. ExtremeMobility AP460i/e Outdoor Access Points...
- Page 16 5 Attach the KT-150173-01 extension arm to a flat surface using four M6 size hex-head screws. Use screw-in anchors with the four M6 size hex-head screws on wood surface. To mount the extension arm on a concrete surface, use concrete anchors. ExtremeMobility AP460i/e Outdoor Access Points...
- Page 17 • Two M6 hex-head screws is used for attaching the MBO-ART02 articulating mounting bracket to the access point • Four M6 hex-head screws are used for attaching the MBO-ART02 articulating mounting bracket to the wall ExtremeMobility AP460i/e Outdoor Access Points...
- Page 18 To attach the WS-MBV-VMM Vehicle Bracket (#32216) on a flat surface, you can use either the M4 or M6 attachment screws. The bracket has four parts: • Flat plate with thumbscrews; the AP attach assembly plate • Stiffener plate #1; used with the AP attach assembly plate ExtremeMobility AP460i/e Outdoor Access Points...
- Page 19 Figure 8: VMM vehicle attach assembly plate 2 Attach the vehicle attach assembly plate using four screws or bolts. The screws or bolts must be tightened sufficiently to hold the bracket and the access point in all environmental conditions. ExtremeMobility AP460i/e Outdoor Access Points...
-
Page 20: Install The Access Point On A Pole
Install the Access Point on a Pole You can install the access point on a pole using the following mounting brackets: • KT-147407-02 bracket parts • KT-147407-02 pole part ExtremeMobility AP460i/e Outdoor Access Points... - Page 21 KT-150173-01 extension arm with KT-147407-02 bracket parts • WS-MBO-POLE01 bracket with the MBO-ART02 articulating mounting bracket Figure 10: KT-147407-02 pole part Note The pole install options are applicable to both internal and external antenna model outdoor access points. ExtremeMobility AP460i/e Outdoor Access Points...
- Page 22 1-axis tilt bracket and the pole bracket. Figure 11: Large bracket holes on the 1-axis tilt part of KT-147407-02 bracket Label Description Large bracket holes used for attaching the M12 screws on the 1-axis tilt part of the KT-147407-02 bracket ExtremeMobility AP460i/e Outdoor Access Points...
- Page 23 3 Fasten the M12 screws using two M12 hex nuts. 4 Insert the 0.5" stainless-steel cable clamp through the long slots on the sides of pole bracket. Figure 13: Long slots on the pole part of the KT-147407-02 bracket ExtremeMobility AP460i/e Outdoor Access Points...
- Page 24 Attach the pole part of the KT-147407-02 bracket to the access point using four M6 hex-head screws. Use the semi-circular cuts on the pole part of the KT-147407-02 bracket to attach the screws. Figure 14: Semi circular cuts on the pole part of the KT-147407-02 bracket ExtremeMobility AP460i/e Outdoor Access Points...
- Page 25 Flat part of the KT-147407-02 bracket • 1-axis tilt part of the KT-147407-02 bracket • Pole part of the KT-147407-02 bracket • KT-150173-01 extension arm • Six M6 hex-head screws • Four hex-head M12 stainless-steel screws and nuts ExtremeMobility AP460i/e Outdoor Access Points...
- Page 26 4 Attach the pole part of the KT-147407-02 bracket to the other end of the KT-150173-01 extension arm using two M12 screws and M12 hex-nuts. 5 Insert the 0.5" stainless-steel cable clamps through the long slots on the sides of the KT-147407-02 pole bracket part. ExtremeMobility AP460i/e Outdoor Access Points...
- Page 27 Access point To mount the access point on to a pole using WS-MBO-POLE01 bracket and the MBO-ART02 articulating mounting bracket: Attach the MBO-ART02 articulating mounting bracket to the access point using two M6 hex-head screws. ExtremeMobility AP460i/e Outdoor Access Points...
- Page 28 Open the cable clamp by turning a flat bladed screwdriver counterclockwise. Then insert the non- clamp end into the pole bracket through the holes. 4 Put the metal band around the pole and attach the WS-MBO-POLE01 bracket to the pole. ExtremeMobility AP460i/e Outdoor Access Points...
- Page 29 Install the Access Point 5 Tighten the cable clamp screw clockwise, tightening the band around the pole. Figure 17: Tightening the cable clamp around the pole ExtremeMobility AP460i/e Outdoor Access Points...
-
Page 30: Chapter 3: Powering Method
Table 9: AP460i/e powering method Power source Description Power is provided through the RJ45 Ethernet ports of AP460i/e, compliant to be powered with 802.3at and 802.3bt to provide full functionality. For reduced functionality, use 802.3af. ExtremeMobility AP460i/e Outdoor Access Points... -
Page 31: Chapter 4: Ge/Console Connections
Before connecting the RJ45 cable, a waterproof cable gland adapter assembly must be installed onto the cable. Figure 18: RJ45 cable gland adapter assembly Label Description Sealing nut Claw Seal Main body Install the cable gland adapter assember onto GE1 or GE2: ExtremeMobility AP460i/e Outdoor Access Points... - Page 32 GE/Console connections Insert the RJ45 cable onto the sealing nut. 2 Slide the claw and seal onto the RJ45 cable. 3 Attach the main body into the GE1 or GE2 port of the access point. ExtremeMobility AP460i/e Outdoor Access Points...
- Page 33 6 Secure the seal nut onto the main body. 7 Tighten the adapter assembly by hand. Tighten the cap to 5 inch lbs. Note There should still be some visible threads after you torque in the cap. ExtremeMobility AP460i/e Outdoor Access Points...
-
Page 34: Chapter 5: Antenna Configuration For External Antenna Model
Figure 19: AP460e external antenna connectors The 2.4G/5G-8 and the 2.4G/5G-7 are sensor antenna ports. Note The internal BLE is always used unless you attach an antenna to the BLE antenna connector. ExtremeMobility AP460i/e Outdoor Access Points... - Page 35 Antenna configuration for external antenna model Note The BLE antenna port and the sensor antenna ports come with dust caps installed on them. Do not remove the dust caps until you need to install the antennas. ExtremeMobility AP460i/e Outdoor Access Points...
-
Page 36: Chapter 6: Specifications
Seven Radios Tri-radio: 2X2:2 2.4GHz, 4X4:4 5GHz, 2X2 sensor 802.3at (802.3af reduced functionality) Console port RJ45 Environmental specifications Item Specifications Operating temperature -40°C to +60°C (-40°F to +140°F) @ 6000 ft. Operating altitude 6000 ft. ExtremeMobility AP460i/e Outdoor Access Points... -
Page 37: Chapter 7: Regulatory Information
Refer to the installation instructions for details. Warning Select the installation position and make sure that the final output power does not exceed the limit set force in relevant rules. The violation of the rule could lead to serious federal penalty. ExtremeMobility AP460i/e Outdoor Access Points... -
Page 38: Safety Guidelines
• Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. ExtremeMobility AP460i/e Outdoor Access Points... -
Page 39: Industry Canada Notice
IC Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 39 cm between the radiator and your body. ExtremeMobility AP460i/e Outdoor Access Points... -
Page 40: Detachable Antenna Usage
ML-2452- Omni HPAG4A6-01 Extreme ML-2452- Panel PNA5-01R Extreme ML-2452- Omni PTA4M4-036 Extreme ML-2452- Omni HPAG5A8-01 Extreme WS-AO- Omni DQ04360N Extreme AI-DQ04360S Omni Extreme ML-2452- Panel 6.92 7.23 SEC6M4-036 / WS-AI- DQ05120 Extreme WS-AI- Panel DE07025 ExtremeMobility AP460i/e Outdoor Access Points... -
Page 41: Australia Notice
This product complies with the requirements of Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. ExtremeMobility AP460i/e Outdoor Access Points... -
Page 42: Supplement To Product Instructions
CE co-location MPE Statement: This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. ExtremeMobility AP460i/e Outdoor Access Points... -
Page 43: European Waste Electrical And Electronic Equipment (Weee) Notice
The symbol above indicates that separate collection of electrical and electronic equipment is required. 2 When this product has reached the end of its serviceable life, it cannot be disposed of as unsorted municipal waste. It must be collected and treated separately. ExtremeMobility AP460i/e Outdoor Access Points... -
Page 44: Declaration Of Conformity In Languages Of The European Community
EU Deceleration of Conformity contact op met Extreme Regulatory Compliance op compliancerequest@extremenetworks.com French Par la présente Extreme Networks déclare que l'appareil Radio LAN device (AP460i/e) est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/53/EU. Pour obtenir le texte intégral du processus de décélération de la... - Page 45 ΕΕ, επικοινωνήστε με την Extreme Regulatory Compliance στη διεύθυνση compliancerequest@extremenetworks.com Icelandic Extreme Networks lysir her med yfir að thessi bunadur, Radio LAN device (AP460i/e), uppfyllir allar grunnkrofur, sem gerdar eru i R&TTE tilskipun ESB nr 2014/53/EU. Vinsamlegast hafið samband við Extreme Regulatory Compliance í...
- Page 46 Regulatory Information Portuguese Extreme Networks declara que este Radio LAN device (AP460i/e) está conforme com os requisitos essenciais e outras disposições da Directiva 2014/53/EU. Para obter o texto completo da desaceleração de conformidade da UE, entre em contato com a Extreme Regulatory Compliance em compliancerequest@extremenetworks.com...
-
Page 47: Index
AP460e ordering information 11 Cable gland assembly 31 AP460i ordering information 11 install the access point Regulatory Information 42 AP460e box contents 12 Regulatory Information, Hazardous Substances 41 AP460e installation 12 AP460i box contents 12 AP460i installation 12 installation procedure safety guidelines 38 flat Surface install 14 ExtremeMobility AP460i/e Outdoor Access Points... - Page 48 Index Specifications Environmental Specifications 36 Product Specifications 36 support, see technical support technical support contacting 5 ExtremeMobility AP460i/e Outdoor Access Points...