Storage Procedure; Winterizing The Spray System - MacDon 625 Operator's Manual

Spray system
Table of Contents

Advertisement

Storage Procedure

Do the following at the end of each operating
season:
CAUTION:
1. Clean the sprayer attachment thoroughly.
Dispose
of
the
environmentally safe manner.
clean the equipment upslope of ditches or
water bodies, cropland, or shelterbelts.
Wash water can contaminate the soil and
can be very toxic to fish, other wild life and
people. Clean equipment away from areas
where family members and others are likely
to frequent.
Never use gasoline, naphtha or any volatile
material for cleaning purpose.
materials may be toxic and/or flammable.
2. Rinse the spray system with clean water
prior to working on the sprayer. Follow the
procedures on page 34 for cleaning the
sprayer tank.
3. Store sprayer attachment in a dry protected
place.
Also:
4. If stored outside, always cover the tank and
plumbing tree with a waterproof tarpaulin or
other protective material. This will protect the
tank from UV light degradation and protect
switches fittings, etc. from inclement weather.
5. Repaint all worn or chipped painted surfaces
to prevent rust.
6. Lubricate the windrower thoroughly, leaving
excess grease on fittings to keep moisture out
of bearings. Apply grease to exposed threads
and sliding surfaces of components.
7. Check for worn components and repair.
Tighten loose hardware and replace missing
hardware.
See Specifications section for
torque charts.
8. Check for broken components and order
replacements from your dealer. Attention to
these items right away will save time and effort
at the beginning of next season.
OPERATION
wash
water
in
an
DO NOT
These
52

Winterizing the Spray System

The spray system should be completely rinsed and
flushed clean before winterizing (refer to page 33).
Drain the sprayer completely.
1. Open the valve at the bottom of the pump to
drain fluid from the pump.
2. Remove the dust cap to the bottom fill coupler
and partially open all valves.
3. Always remove the line strainer at the spray
system pump and store it inside for the winter.
4. Remove all nozzle tips, screens and anti-drip
devices from each nozzle body.
Drain Valve on Sprayer Pump

Advertisement

Table of Contents
loading

Table of Contents