Table of Contents
Advertisement
TOWING THE SPRAYER ON A TRAILER
The MacDon Sprayer can be loaded on front or
rear
mount
trailers
windrower, however, check local laws for width
regulations in your area.
operator to never transport the sprayer: a) without
the transport lights flashing, b) with mixed
chemicals in the tank or c) without the booms in
firm contact with the boom carriers to prevent
bouncing of booms. Refer to the Self-Propelled
Windrower Operator's manual in the section on
Transporting
the
Windrower
information on transporting the windrower and the
flashing amber lamp switch location.
1. Prior to transporting the sprayer on a trailer,
prevent the casters from turning by inserting
the locking pin.
2. Start the engine. Line up the sprayer behind
the trailer. Stop the engine and remove the
key.
3. Exit the cab.
Remove the pin from the
transport position.
through the sleeve of the walking beam and
ensure the pin goes through the hole in the
caster fork. Secure the caster pin with the hair
pin.
Secure the rear caster wheel prior to
transporting the sprayer on a trailer.
OPERATION
while
attached
to
the
MacDon advises the
for
additional
Insert the locking pin
4. After the sprayer has been taken off the trailer,
remove the locking pin from the rear caster.
Return the locking pin to the transport position.
Pin in the transport position.
47
Advertisement
Table of Contents
