Specifications - MacDon 625 Operator's Manual

MacDon Field Sprayer
AVAILABLE SIZES
SPRAY SYSTEM
WEIGHT
FEATURES
OPTIONS
REQUIRED MOUNT TRACTOR SPECIFICATIONS:
SPECIFICATIONS AND DESIGN ARE SUBJECT TO CHANGE WITHOUT NOTICE OR OBLIGATION TO
REVISE UNITS PREVIOUSLY SOLD.

SPECIFICATIONS

90 feet (27.5 meters) width - 12 feet 7 inches (3.8 meters) width
when sprayer is in transport position
400 US Gallon (1500 liters) spray capacity
Spraying height from 24" (60 cm) to 76" (190 cm)
Standard nozzle spacing of 20" (50 cm)
Dry boom design allows adjustable nozzle spacing
Micro-Trak MT-3405 rate control system
Individual boom controls
Polyethylene tank
80-02 Extended Range TeeJet stainless steel nozzles standard
TeeJet triple nozzle bodies installed from the factory
Centrifugal hydraulic motor driven Hypro pump - maximum flow is
150 USgpm (580 LPM), maximum pressure is 150 psi (1030 kPa).
DICKEY-john Radar Velocity Sensor
Line strainer
4800 lbs. (1500 kg) with tank empty
Innovative and gentle boom tip break away
Independent boom lift/fold/tip
Charcoal cab air filter
Rugged, revolutionary boom design
Outstanding operator visibility with front boom design
Rubber based vertical and horizontal boom suspension
Optional 150 US Gallon (580 liters) Rear tank kit
Rear center boom location and kit
Foam marker kit
Windscreen kit
Rinse nozzle installed inside the tank
Boom touch down wheel
Turbo Engine Required
Tail Wheel Tires 16.5L X 16.1 to be 80% filled with Calcium Chloride for
ballast and at 20 psi (140 kPa) pressure REQUIRED when the rear tank
kit has not been installed.
16.5L X 16.1 Drive Tire Option Recommended
No. 7 Power Wheel Option Recommended when the sprayer attachment is
installed on a 9300 or 9350 SP Windrower with 21.5L x 16.1drive tires.
No. 8 Power Wheel REQUIRED when SP Windrower has 19.5L x 24 drive
tires or the 14.6L x 24 drive tires.
16