Step 7. Install Tall Crop Divider - MacDon A30-S Unloading And Assembly Instructions

Auger self-propelled windrower header

Hide thumbs Also See for A30-S:

Table of Contents

STEP 7. INSTALL TALL CROP

DIVIDER

If kit is not supplied, proceed to STEP 8. ADJUST

LEAN BAR. Otherwise, proceed as follows:

a. Remove hardware on both sides of lean bar,

and remove lean bar.

b. Attach extensions (C) to lean bar with four bolts

(D) and nuts provided.

c. Re-attach lean bar to header with existing

hardware at desired location. Tighten bolts.

169078

UNLOADING AND ASSEMBLY

d. Attach LH divider assembly (E) to LH end of

e. Install U-bolt (H), and tighten all bolts.

lean bar with two bolts (F) and nuts provided.

The divider may be positioned as shown, or

using the optional mounting hole (G).

Repeat for RH divider.

Revision E

Table of Contents

A40-d