Table of Contents
Advertisement
CAUTION:To help prevent injury, use
protective
protective glasses or goggles, and
close fitting clothing.
CAUTION: Be careful when cutting
strapping and shipping wire. Release
of pressure can cause sudden
movement. Remove wire and strapping from
the assembly area.
1. IDENTIFY LEFT/RIGHT END:
Lay bats down as they were strapped to
center tube. Do not turn end for end. Notches
(A) in bats should line up with lugs (B) on reel
center tube. Identify left and right ends of
center tube by the decal (C) at each end.
2. SUPPORT CENTER TUBE on suitable
stands.
WARNING:
weighs between 400 lbs. (15') and
800 lbs. (30') and must be adequately
supported.
NOTE: Be sure reel is located where it can be
easily approached when mounting on header.
Form 46240
ASSEMBLY
shoes,
a
hard
hat,
The
completed
reel
IDENTIFY LEFT & RIGHT ENDS
SUPPORT CENTER TUBE
5
Issue 06/06
Advertisement
Table of Contents
