Gold's Gym XR 45 User Manual page 8

Frame Assembly
1.
To make assembly easier, read the
information on page 7 before you begin.
Insert the Front Base (94) into the Base (1).
Then, insert two M8 x 56mm Carriage Bolts (87)
upward into the indicated holes in the Base (1).
Tip: It may be helpful to place a piece of
tape over the bolt heads to hold them in
place.
2. Attach the Lower Weight Guides (25) and the
Base (1) to the Stabilizer (2) with two M10 x
67mm Bolts (71), two M10 Washers (57), and
two M10 Locknuts (56). Do not tighten the
Locknuts yet.
Insert the Upper Upright (3) into the Lower
Upright (93). Attach the Upper Upright with an
M10 x 65mm Bolt (97), two M10 x 20mm
Screws (95), four M10 Washers (57), and an
M10 Locknut (56). Do not tighten the Locknut
yet.
Attach the Lower Upright (93) to the Base (1)
with the two indicated M8 x 56mm Carriage
Bolts (87) and two M8 Locknuts (58). Do not
tighten the Locknuts yet.
1
94
2
3
57
56
57
57
93
58 71
58
1
87
8
1
Holes
87
95
57
97
25
25
57
56
57
2
71