Gold's Gym XR 45 User Manual page 15

14. Identify the two V-pulleys (46), the nine Pulleys
(not shown), and the two Thin Pulleys (not
shown).
Route the Arm Cable (54) over a V-pulley (46).
Attach the V-pulley (46), a Large Cable Trap
(50), two Full Guards (41), and an M10 Washer
(57) to the Upper Upright (3) with an M10 x
63mm Bolt (75) and an M10 Locknut (56).
Make sure that the Large Cable Trap (50) is
oriented to hold the Arm Cable (54) in the
groove of the V-pulley (46).
15. Route the Arm Cable (54) under a Pulley (48).
Attach the Pulley (48) and two Half Guards (43)
to the Double U-bracket (63) with an M10 x
46mm Bolt (81) and an M10 Locknut (56). Make
sure that the Half Guards are on the outside
of the Double U-bracket as shown.
16. Route the Arm Cable (54) over a V-pulley (46).
Attach the V-pulley (46), a Large Cable Trap
(50), two Full Guards (41), and an M10 Washer
(57) to the Upper Upright (3) with an M10 x
63mm Bolt (75) and an M10 Locknut (56).
Make sure that the Large Cable Trap (50) is
oriented to hold the Arm Cable (54) in the
groove of the V-pulley (46).
14
3
15
54
48
43
81
16
75
41
46
54
15
56
41
57 46 50
41
54
56
43
63
50
57
41
3
56
75