Gold's Gym XR 45 User Manual page 19

26. Wrap the High Cable (55) under a Pulley (48).
Attach the Pulley (48), a Small Cable Trap (51),
and two Half Guards (43) to the upper hole in
the U-bracket (45) with an M10 x 51mm Bolt
(66) and an M10 Locknut (56).
Make sure that the Small Cable Trap (51) is
oriented to hold the High Cable (55) in the
groove of the Pulley (48) and that the Half
Guards (43) are on the outside of the U-
bracket (45).
27. Route the High Cable (55) upward through the
Top Frame (4) and over a Thin Pulley (47).
Attach the Thin Pulley (47) inside the Top
Frame (4) with the M10 x 67mm Bolt (71) used
in step 25, a 13mm Spacer (52), an M10
Washer (57), and an M10 Locknut (56).
28. Route the High Cable (55) over a Pulley (48)
and downward through the Top Frame (4).
Attach the Pulley (48) inside the Top Frame (4)
with an M10 x 67mm Bolt (71), two M10
Washers (57), two 13mm Spacers (52), and an
M10 Locknut (56).
26
27
56
57
28
56
57
4
19
55
43
56
48
51
66
43
45
55
52
4
47
71
48
52
55
52
57
71