Basic Kit - Raven AccuBoom system Installation Manual

Congratulations on your purchase of the Raven AccuBoom system! This system
is designed to provide worry-free turn on and turn off of your booms with respect
to the as-applied coverage map. The following instructions are designed to
assist you in the proper installation of the AccuBoom system. See the Installation
and Operation Manual of your particular console for instructions on setting up the
software and using the AccuBoom system.

Basic Kit

Contents
AccuBoom CAN Node
Machine Specific Console Cable (115-1001-018)
CAN Tee Cable: 12' long (115-0171-362)
CAN Tee Cable: 6' long (115-0171-753) (2)
Install Manual
Important!
position while AccuBoom control is in operation!
Important!
Envizio Plus/Pro or Viper/Viper Pro so that
Boom 1 = Left Fence Row
Boom 2 = Boom 1
Boom 3 = Boom 2, etc.
Boom 1 (left fence row) normally gets a 0" or 1" value and
uncheck Boom 1 from Accuboom operation.
All boom switches must be in the ON
Boom configuration must be set up in
Manual # 016-1001-049
C
H A P T E R
1
I
NTRODUCTION
1