Rotor Installation - NUVE NF 1200 User Manual

NOTE: Distribution of the load is more important than the load itself.
5.3.

ROTOR INSTALLATION


Put some light oil on the drive head to prevent sticking.

Be careful that the rotor fits on the drive shaft (See Figure 4).

Screw the shaft nut with socket wrench to the clockwise direction. Make sure that shaft nut is
screwed tightly, but do not expose over-force to the socket wrench while screwing.

For swing-out rotors, lubricate the pins where the buckets are hanged.

Place the buckets to the rotor.

Connect the centrifuge to the power supply.
Figure 3
Figure 4
16