Section 3; Symbols; Section 4; Operating Unit - NUVE NF 1200 User Manual


Do not use rotors and accessories with corrosion and mechanical damages.

Mains supply should be appropriate to power of the device and grounded.

Use tubes whose sizes are suitable to the rotor and accessories.

Tubes which are used in the centrifuge should not be deformed by the effect of the centrifuge
force.

Use glass tubes to balance, if glass tubes are used. Use plastics tubes to balance, if plastics
tubes are used.

Do not start the device unless tubes are in balance.

Imbalance loading may cause mixing the samples, broken tubes, and damages on the rotor
and motor shaft.
IF MENTIONED WARNINGS ARE NOT CONSIDERED, NÜVE WILL NOT BE RESPONSIBLE
FROM THEIR RESULTS.
Symbol in the operating instructions:
Attention, general hazard area.
This symbol refers to safety relevant warnings and indicates possibly dangerous
situations.
The non-adherence to these warnings can lead to material damage and injury to
personal.

Symbol in the operating instructions:
This symbol refers to important circumstances.
4.1.

OPERATING


Open the lid and check that there is no sample in the instrument.

Turn the centrifuges on by using On/Off switch.

See that the display and control panel activates.

Learn the functions of the control panel (See Part 4.2.1).

Set the values and start the operation (See Part 4.3)

SECTION 3

SYMBOLS

SECTION 4

OPERATING UNIT

9