Selecting Microsoft As Your Security Choice - Intermec CK3a1 User Manual

Chapter 2 — Connecting and Configuring the CK3
9 Define a value for the keys you want to use. You can define up to
10 For Transmit key, choose the key you want to use for
11 Save your settings and exit Intermec Settings.

Selecting Microsoft as Your Security Choice

The default security setting is Funk. If you want to use Microsoft
security, you need to select it as your security choice. After you select
Microsoft as your security choice, you will be prompted to save your
settings and reset your CK3 for your change to take effect.
With Microsoft as your security choice, you can configure:
•
•
•
To select Microsoft security as your security choice
1 Select Start > Settings > the System tab > Intermec Settings. The
2 Select Communications > 802.11 Radio > Security Choice.
3 From the Security Choice list, select Microsoft Security and save
4 Tap Yes. The CK3 resets and starts with Microsoft Security as the
44
four keys (Key 1 through Key 4).
Enter an ASCII key or a hex key that is either 5 bytes or 13 bytes
long depending on the capability of the radio. Set a 5- byte value
for 64-bit WEP or a 13-byte value for 128-bit WEP. Hex keys must
be preceded by 0x and contain 5 or 13 hex pairs.
transmitting data.
WPA
802.1x
Static WEP
Intermec Settings application appears.
your settings. An alert box appears telling you that you must save
your settings and warm boot the CK3 for the new security choice
to take effect.
Security Choice.
CK3 Mobile Computer User's Manual