Understanding The Status Leds - Intermec CK3a1 User Manual

Chapter 1 — Using the Computer
To align the touch screen using the keypad
1 Access the Start menu by pressing
2 Press the Down button to select Settings.
3 Press Enter.
4 Press the Tab button until the Settings tabs are highlighted.
5 Press the Right Arrow button to select the System tab.
6 Press Tab until the Screen icon is highlighted.
7 Tab to Align Screen and press Enter.
8 Follow the instructions to align the screen.
9 Click ok.
If you are still unable to align the touch screen, you can clean boot the
CK3. For help, see

Understanding the Status LEDs

The CK3 has three status LEDs.
Notification LED
Status LEDs
14
"Clean Booting the CK3" on page
Battery status LED
Good read LED and Intermec
Ready-to-Work indicator
.
74.
CK3 Mobile Computer User's Manual