Scubapro Digital Heart Rate Monitor; Bluetooth Usb Stick; Interfaces For The Hud And An Introduction To Logtrak; Establishing Communication - Uwatec Galileo HUD User Manual

Hide thumbs Also See for Galileo HUD:
Table of Contents

Advertisement

After a dive rinse the heart rate monitor in
fresh water, dry it and store in a dry place.
For HR monitors fitted with a battery cap,
it is recommended that the battery be
changed by an authorized SCUBAPRO
dealer. Check the operating conditions and
depth rating of the HR monitor from the unit
or its packaging.
4.5

Bluetooth USB stick

PCs with Bluetooth versions lower than
4.0 require a generic Bluetooth dongle 4.0
or higher in combination with a Windows
operating system 8 or higher.
With older operating systems a BlueGiga
type dongle is required.
F
NOTE: Laptops with an old internal
Bluetooth module (lower than 4.0)
will require an external generic USB
Bluetooth stick.
80
5.
INTERFACES FOR
THE HUD AND AN
INTRODUCTION TO
LOGTRAK
5.1
Establishing
communication
The HUD has 3 ways of communicating
with a PC, laptop or handheld device.
When downloading dive data Log mode or
Bluetooth mode must be used.
When uploading SW updates Disk mode
has to be selected.
From the Main menu, rotate the push-
wheel to toggle down to Communication,
then press-and-release.
In the Communication menu screen you
can choose from:
• DISK MODE
• LOG MODE
• BLUETOOTH MODE
When selecting Disk mode, a press-and-
release of the push-wheel will take you to
the following screen:
GALILEO HUD USER MANUAL

Advertisement

Table of Contents
loading

Table of Contents