1.17 Turning Off The Hud - Uwatec Galileo HUD User Manual

4. In case the pairing was unsuccessful,
exit your HUD's pairing menu, wait at
least 30 seconds, and repeat steps 1.
and 2.
F
NOTE: you can extend the countdown
timer by pressing-and-releasing the
push-wheel.
After a successful pairing, on the Surface
screen a heart symbol alternating with a
thermometer symbol will appear in the
lower right corner, accompanied by the
heart rate and skin temperature values. If
"---" appears in the lower right hand corner
instead of a value, that means the heart rate
monitor is paired but no signal is available.
GALILEO HUD USER MANUAL
F
NOTE: The digital heart rate monitor
has a range of approximately 1.0m/3ft.
For complete instructions on the Digital
Heart Rate Monitor's functionality and
maintenance refer to its user manual
available at www.scubapro.com/manuals.

1.17 Turning off the HUD

The HUD turns off automatically after 5
minutes without active use. When in the
Surface screen, you can turn the HUD
off manually with a press-and-hold of the
push-wheel.
29