Table of Contents
Advertisement
To reduce the distance between the HUD
screen and the holder you would now
remove one of these spacers.
F
NOTES: If you'll notice, the standard
spacers are recessed on one side. This
is so parts can be joined more efficiently.
For example, the standard spacer
closest to the HUD should have its
recessed side facing the HUD. (Unless
you don't need that spacer, in which
case it's okay for the compression
spring to be placed directly against
the HUD.)
Also, when possible, the standard spacers
on either side of the compression spring
should have their recessed sides facing the
spring.
Finally, while it's okay to shift the spacers
from one side to the other when making
adjustments, never remove them permanently
from the assembly. The HUD is designed to
be used with all spacers at all times.
7. Replace the compression spring, slide
on the standard spacers, then the
locking spacer, and finally the hand
wheel.
GALILEO HUD USER MANUAL
IMPORTANT
When replacing the hand wheel, make sure
to thread it onto the post flat-side first (see
#3 in next picture). This ensures that both
the assembly and the hand wheel itself is
secured with the hex nut located inside the
hand wheel.
1
3
2
8. Remount the HUD like before and
tighten down the hand wheel.
11
Advertisement
Table of Contents
