1.10 Hud Push-Wheel Control - Uwatec Galileo HUD User Manual

1.10 HUD push-wheel control

The HUD operates with an intuitive push-
wheel that allows you to access and
control HUD functions with only one hand
and without having to look to see what that
hand is doing.
• To operate the wheel, simply rotate it
to toggle from the Surface screen to
the GPS screen, to navigate up and
down within a menu, or to increase or
decrease a user setting.
• To enter or exit a menu or to set user
parameters you would press the end of
the push-wheel.
• There are 2 methods for pushing the
HUD push-wheel control: a press-and-
release, and a press-and-hold.
• A press-and-release turns on the HUD,
takes you to the main menu, lets you
enter the various sub-menus and lets
you select functions and save settings.
• A press-and-hold allows you to return
to the previous menu or screen, edit
settings, and from the Surface screen
turn the HUD off.
• Press-and-release and press-and-hold
functions can change based on what
menu or operational mode you're
currently in. To avoid confusion, at
the bottom of each screen you'll see
reminders of what each push function
does on that particular screen. (The
"short" arrow indicates the press-and-
release function for that screen, while
the "long" arrow indicates the press-
and-hold function.)
• The HUD's push-wheel rotation,
press-and-release and press-and-hold
functions while at the surface and during
diving are summarized in the following
table.
GALILEO HUD USER MANUAL
17