Deco Stop Table; Alarms And Warnings During Diving; Maximum Depth; Dive Time - Uwatec Galileo HUD User Manual

Hide thumbs Also See for Galileo HUD:
Table of Contents

Advertisement

3.2.5

Deco stop table

By rotating the push-wheel you can also
get a display showing all deco stops,
including the PDIS stop.
Deco stops are colored in white. The PDIS
stop is colored in blue. These stops don't
include ascent time.
In addition to deco and PDIS stop info,
the screen's top row displays (from left)
current depth, local time and dive time, and
running down the right side of the screen is
the ascent/descent speed bar.
3.3
Alarms and warnings
during diving
The HUD can alert you to potentially
dangerous situations via warnings and
alarms. You can modify the warning and
alarm settings in the menus or via a PC
interface.
General warnings are shown in yellow,
while alarms appear in solid red and/or
blinking red. Additionally, audible signals
are available when the Sound function is
enabled.
• When in Gauge mode, all warnings and all
alarms are OFF.
• When the HUD is set to SOUND OFF mode, all
audible alarms and warnings are switched off.
GALILEO HUD USER MANUAL
WARNING
3.3.1

Maximum depth

Maximum depth will trigger a warning. See
chapter: Maximum dive depth warning
to learn how to set the warning depth.
Upon exceeding the maximum depth limit
for the first time, the screen's depth will start
to blink. This will continue for 30 seconds
without changing color. At the same time,
an audible alarm will beep for 2 minutes.
F
NOTE: If the maximum depth limit
is exceeded a second time, these
warnings will not be repeated.
3.3.2

Dive time

See chapter: Maximum dive time warning
to learn how to set this warning.
When the pre-set dive time is reached, the
dive time will start to blink for 30 seconds,
and an audible alarm will beep for 2 minutes.
3.3.3
No-stop time
If you wish to avoid unintentionally
performing a decompression dive, the HUD
will activate a warning when the no-stop
time reaches 2 minutes.
This applies to both L0 no-stop and MB
no-stop time (see chapter: Diving with
MB levels for more information on MB
level diving). This warning gives you the
opportunity to start ascending before
incurring a decompression stop obligation.
If the no-stop time reaches 0 minutes the
color changes to red.
59

Advertisement

Table of Contents
loading

Table of Contents