Advertisement
1ST THING:
IMPORTANT:
NOTE:
Make sure that the GALILEO HUD is switched on while the battery is charging.
GALILEO HUD Push-Wheel User Controls:
1
)
Rotate.
2
)
Press-and-Release.
3
)
Press-and-Hold.
PRESS AND RELEASE
SURFACE
SCUBA
(limited selection
APNEA
(limited selection)
CCR
(limited selection)
GALILEO
Attach the protective foil (included in the package) to preserve screen quality.
In order to switch on the GALILEO HUD for the first time a power connection is needed.
(The act of pressing and quickly releasing the push-wheel.)
(The act of pressing and holding the push-wheel for 1 second before release.)
Main menu
Main menu
Main menu
Main menu
QUICK USE GUIDE
Push-Wheel Functions
PRESS AND HOLD
Shutdown
Gas change to recommended gas
Finish session when depth < 0.1m
Setpoint change when required
ROTATE PUSH WHEEL
Switch to GPS screen when activated
Change dive screen
Profile when session is ongoing &
while at the surface
Change dive screen
Advertisement
Table of Contents
Related Manuals for Uwatec GALILEO HUB
Summary of Contents for Uwatec GALILEO HUB
- Page 1 GALILEO QUICK USE GUIDE 1ST THING: Attach the protective foil (included in the package) to preserve screen quality. IMPORTANT: In order to switch on the GALILEO HUD for the first time a power connection is needed. NOTE: Make sure that the GALILEO HUD is switched on while the battery is charging. GALILEO HUD Push-Wheel User Controls: Rotate.
- Page 2 GALILEO HUD TIPS PUSH-WHEEL To operate the push-wheel, simply rotate it to navigate screen to screen, or up and down within ■ a menu, or to increase or decrease a user setting. A press-and-release of the push-wheel turns on the GALILEO HUD, takes you to the main menu, lets you ■...
- Page 3 WRECK CHARGE YOUR BATTERY! Your GALILEO HUD is delivered to you in a deep sleep mode. This is done to preserve battery life and ensure ■ your GALILEO HUD arrives with a fresh battery. REMINDER: In order to switch on the GALILEO HUD for the first time a power connection is needed. After ■...
- Page 4 PAIRING YOUR TRANSMITTER Mount 1st stage regulator with Smart transmitter on a full tank. Turn on your GALILEO HUD, go to the GAS menu, and select the gas you want to pair to. A press-and-release will save your selection (indicated by an “X” in the box next to the select- ed gas) and return you to the Surface screen.
Need help?
Do you have a question about the GALILEO HUB and is the answer not in the manual?
Questions and answers