Interfacing With A Pc/Mac Or Handheld Device; Disk Mode - Uwatec Galileo HUD User Manual

5.2 Interfacing with a PC/
Mac or handheld device
To connect the USB cable for interfacing
with a personal computer, first plug the
power/USB cable into your HUD as shown
in the picture below.
Now plug the other end of the cable into a
USB port in your personal computer, and
you're ready to start the interface process.
Clean the contacts of your HUD before
connecting.
Always connect the HUD in a dry and clean
environment.
5.2.1

Disk mode

Disk Mode allows you access to the HUD's
memory. In the following picture you can
see the file structure of the HUD.
82
WARNING
WARNING
WARNING
Do not erase any of the system files from your
HUD! Removing system folders will lead to a
malfunctioning HUD. Diving with a HUD is not
safe if data has been removed.
5.2.2 Updating your HUD
To perform a software update, first go
to www.scubapro.com and click on the
Resources tab. On the drop-down menu
select Software & Firmware. From there
scroll down to "Galileo HUD Firmware
Update" and click on the link to download
the firmware package.
Next, connect your HUD via USB to your
personal computer and copy the file
"HUDupgrade.bin," and the folder "LANG"
directly to your HUD.
Disconnect the HUD from your PC/MAC
with the functionality of Safe Remove and
Eject Media.
Shut off and then restart the HUD with a
press-and-release of the push-wheel.
For about 30 seconds the display will
remain black while the update is being
performed in the background.
At this point the HUD will undergo a
quick series of internal tests. After that,
the start screen will appear, indicating
that the software has been updated. For
step-by-step instructions on the update
procedure refer to the "HUD Software
update procedure guide" available at www.
scubapro.com.
GALILEO HUD USER MANUAL