Water Contacts; Introduction To Scubapro Logtrak - Uwatec Aladin TEC 3H User Manuals

System and operation
Gauge mode (stopwatch):
Diving with 2 or 3 mixtures:

2.4 Water contacts

On submerging in water the water contacts switch on Aladin TEC 3H automatically.
If you have chosen the option "Water contacts off" ("set 1", ->70), Aladin TEC 3H will turn on
with a delay of up to 1 minute into the dive. This will affect functioning of the computer.
Make sure that the computer is on before starting the dive.

2.5 Introduction to Scubapro LogTRAK

LogTRAK is the software that allows Aladin TEC 3H to communicate with a Windows-based PC or
Mac OS.
In order to take advantage of any of these features, you need to establish a communication between
your PC and Aladin TEC 3H with a dongle.
To start the communication
1. Connect the dongle to your PC
2. Launch LogTRAK on your PC
3. Select the IrDa port where the dongle is connected
Extras -> Options -> download
Select the port that is used for Aladin TEC 3H dongle.
4. Place the Aladin TEC 3H on the dongle.
10
• Switch on the backlight
• Activate the safety stop timer
(dive mode only, in depths < 6.5m / 21ft)
• Restart
• Initiate switch to gas d, gas 1 or gas 2
• Interrupt switching process
• Confirm switch to gas d, gas 1 or gas 2
WARNING