Table of Contents
Advertisement
Dives in Gauge mode are performed at your
own risk. After a dive in Gauge mode you must
wait at least 48 hours before diving using a
decompression computer.
During a dive there are 2 displays available:
the standard display, and the profile.
In addition to the gas pressure bar on the
left side of the screen, you have the ascent
rate bar shown on the right side.
By rotating the push-wheel you switch to
the profile display.
While diving you can access the Navigation
menu to use the compass, or the GPS after
surfacing.
During a dive in Gauge mode, the HUD
displays the average depth in the corner at
GALILEO HUD USER MANUAL
WARNING
the top of the left side. This can be reset by
entering the Settings menu and selecting
Reset Av Depth.
During the dive you also have access to the
following Settings Display menu.
When on the surface in Gauge mode, the
HUD will not show no-fly time or maximum
77
Advertisement
Table of Contents
