Check The Battery Status; Interfacing With Windows/Mac And Apps; Introduction To Scubapro Logtrak - Uwatec Aladin ONE Matrix User Manual

F
NOTE: Setting the sound to "off"
applies also to surface functions
(altitude alarm and change of altitude
class).
5.2.7

Check the battery status

Battery status is shown in this menu. A fresh
battery is indicated by 6 zeros, whereas a
used battery is indicated by fewer zeros, as
in below:
To learn more about battery status, see
chapter: System and Operation, section:
Checking the battery condition.
32
6. INTERFACING WITH
WINDOWS/MAC AND
APPS
6.1 Introduction to
SCUBAPRO LogTRAK
LogTRAK is the software that allows
the Aladin One to communicate with a
Windows-based PC, a Mac, Android
devices or Apple devices.
In order to take advantage of any of
these features, you need to establish a
communication between your PC and your
Aladin One with a Bluetooth connection.
To start the communication:
1. If your PC/Mac has Bluetooth, enable it.
a. If your PC/Mac doesn't have a
Bluetooth Low Energy (BLE),
connect the suitable dongle to your
PC/Mac.
2. Launch LogTRAK on your PC/Mac.
a. Select the Bluetooth.
(Extras > Options > Download)
Select the Bluetooth option.
3. Switch on the Aladin One.
4. Press the right button to get to the
Bluetooth menu.
ALADIN ONE USER MANUAL