Uwatec Galileo HUD User Manual page 47

2.3.7.1 Language
For more information on selecting and
setting your preferred language, see
chapter: 1.10 Basic settings.
2.3.7.2 Time
For more information on setting Time and
Date, Time Zone, Time from GPS and Time
Format, see chapter: 1.10 Basic settings.
2.3.7.3 Units
For more information on setting metric
or imperial units for Depth, Temperature,
Pressure and Distance, see chapter: 1.10
Basic settings.
2.3.7.4 Desat reset
The HUD provides a function that allows
you to reset your desaturation history.
Any tissue saturation information from a
recent dive can be reset to zero, allowing
the HUD to treat the next dive as a non-
repetitive dive. This function is useful when
the HUD is going to be loaned to another
diver who has not dived in the last 48 hours.
Resetting
calculations of the algorithm, which may
lead to serious injury or death. Do not reset
desaturation without a valid purpose.
GALILEO HUD USER MANUAL
WARNING
desaturation will affect
F
NOTE: Some menu changes are not
possible while the HUD is counting
down desaturation. If you decide to
reset desaturation, the safety code
313 must be entered. This procedure
prevents unwanted resetting, plus
the desaturation reset will be stored
in memory; in the next dive log the
desaturation reset warning will be
shown.
To reset
release the push-wheel to enter the reset
desaturation menu screen.
Enter the first number of the safety code,
followed by a press-and-release, repeat for
the second number, and then the third.
When the safety code is correctly entered
and confirmed with a press-and-release
of the push-wheel, the desaturation reset
is complete and the following screen will
appear.
the
desaturation, press-and-
47