Setting The Surface Interval Alarm; Setting The Ascent Speed Alarm; Interfacing With Windows/Mac And Apps; Introduction To Scubapro Logtrak - Uwatec ALADIN SPORT MATRIX User Manual

"On" or "Off" starts to flash.
2. Switch between on/off by pressing the
left or right button.
3. Confirm the setting with a press-and-
hold of the right button.
The interval value starts to flash.
4. Scroll through the time values by
pressing the left or right button.
5. Confirm the selected interval time with a
press-and-hold of the right button.
5.4.6 Setting the surface interval
alarm
With this alarm you can set a time for
recovery or a start time for a repetitive dive
when training against given tables.
1. Confirm that you wish to change the
settings of the surface interval warning
with a press-and-hold of the right
button.
"On" or "Off" starts to flash.
2. Switch between on/off by pressing the
left or right button.
3. Confirm the setting with a press-and-
hold of the right button.
The time value starts to flash.
4. Scroll the time values by pressing the
left or right button.
5. Confirm the selected surface time with a
press-and-hold of the right button.
5.4.7 Setting the ascent speed
alarm
Ascent speed can be set with this alarm.
1. Confirm that you wish to change the
settings of the ascent speed alarm with
a press-and-hold of the right button.
"On" or "Off" starts to flash.
56
2. Switch between on/off by pressing the
left or right button.
3. Confirm the setting with a press-and-
hold of the right button.
The time value starts to flash.
4. Scroll the ascent speed values by
pressing the left or right button.
5. Confirm the selected maximum ascent
speed with a press-and-hold of the right
button.
6. INTERFACING WITH
WINDOWS/MAC AND
APPS
6.1 Introduction to
SCUBAPRO LogTRAK
LogTRAK is the software that allows
the Aladin Sport to communicate with
a Windows-based PC, a Mac, Android
devices or Apple devices.
In order to take advantage of any of
these features, you need to establish a
communication between your PC and your
Aladin Sport with a Bluetooth connection.
To start the communication:
1. If your PC/Mac has Bluetooth, enable it.
a. If your PC/Mac doesn't have a
Bluetooth Low Energy (BLE),
connect the suitable dongle to your
PC/Mac.
2. Launch LogTRAK on your PC/Mac.
a. Select the Bluetooth.
(Extras > Options > Download)
Select the Bluetooth option.
3. Switch on the Aladin Sport.
4. Press the right button to get to the
Bluetooth menu.
ALADIN SPORT USER MANUAL