Evse With A Socket - ABB Terra AC User Manual

Operation
1. Select one of the two ways to end the charge session.
•
•
2. Disconnect the EV charge cable from the EV.
3. Wrap the EV charge cable around the enclosure. Refer to section 4.6.
4.5.2

EVSE with a socket

1. Select one of the two ways to end the charge session.
•
•
2. Disconnect the EV charge cable from the socket of the EVSE.
3. Disconnect the EV charge cable from the connector on the EV.
34
Wait until the charge session is completed.
• The mobile app shows that the charge session is completed.
• The charging LED is on.
• If your EVSE has a display, the display shows that the charge session is
completed.
When the charge session is completed, the EVSE disconnects the power
supply automatically.
Authorize the ending of the use of the EVSE with your RFID card or the
mobile app.The authorization of the disconnection to the EV starts.
Caution: During the charge session, do not disconnect the EV charge
cable. There is a risk of damage of the socket of the EVSE or the
connector of the EV.
Note: If you disconnect the EV charge cable during the charge session,
the EVSE automatically disconnects the power supply. This stops all
charging operations.
Wait until the charge session is completed.
• The mobile app shows that the charge session is completed
• The charging LED is on.
• If your EVSE has a display, the display shows that the charge session is
completed.
When the charge session is completed, the EVSE disconnects the power
supply automatically.
Authorize the ending of the use of the EVSE with your RFID card or the
mobile app.The authorization of the disconnection to the EV starts.
BCM.V3Y00.0-EN | 002 - DRAFT