Charger Configurations; Authorization To Charge; Charging Instruction; Charging With 1 Depot Charge Box Gen2 - ABB HVC-R 107 V2 User Manual

2.4

Charger configurations

The charger is built up with a modular architecture.
Supported charging standards in a charger configuration are described by a letter:
Product
HVC-107R V2 CE
HVC-160R V2 CE
For each product configuration (107 or 160kW) it is possible to connect 1 up to 4 Depot Charge Box
Boxes GEN2.
2.5

Authorization to charge

The standard setting is without authorization. This means that every vehicle supporting CCS is able
and allowed to start a charge session. Operating a charger with authorization requires a subscription
to a back office. Authorization can only be done based on the Vehicle ID and requires a subscription
to a back office. This product does not support a RFID reader.
3

Charging instruction

3.1

Charging with 1 Depot Charge Box GEN2

Start charging:
1. Park the electric vehicle with the charge inlet within reach of the connector.
2. Turn off the electric vehicle.
3. Connect the charger's connector to the vehicle's charge inlet.
D O C U M E N T N O. : 9 A K K 10 8 4 67 A 6 6 3 5 - E N V 0. 3 | D AT E : 2 0/ 1 2 / 2 0 2 2
Description
107kW charge cabinet configuration with 1 to 4 Depot Charge Box
Boxes GEN2, supporting CCS2 with CE certification
160kW charge cabinet configuration with 1to 4 Depot Charge Box
Boxes GEN2, supporting CCS2 with CE certification
H V C - R 1 0 7 / 1 6 0 V 2 E -B U S C H A R G E R - U S E R M A N U A L
PA G E 10 O F 2 0