Technical Data Of The Vehicle - Reely ROAD Rex-X Operating Instructions Manual

1:8 electro-buggy
Table of Contents

Advertisement

Available languages

Available languages

16.

Technical Data of the Vehicle

Scale: ............................................... 1:8
Suitable drive batteries: ................... Two identical-build 2-cell LiPo battery packs (rated voltage 7.4 V)
The enclosed Y-rechargeable battery adapter switches these two 2-cell LiPo battery packs in series so that
the speed controller works with 4 cells (rated voltage 14.8 V).
Due to the principle, a single 4-cell LiPo battery pack is also suitable for operation of the vehicle. This is not
recommended, since this will relocate the centre of gravity of the vehicle to the left or right side and influence
the driving conduct very negatively. The hook-and-loop tapes of the battery holders are also only designed
for 2-cell rechargeable batteries.
Drive: ............................................... Brushless electric motor
Suspension: ..................................... Independent wheel suspension with spiral spring/shock-absorber, adjustable
Dimensions (L x W x H): .................. 520 x 310 x 202 mm
Tyre dimensions (W x Ø): ................ 43 x 117 mm
Wheel base: ..................................... 325 mm
Ground clearance: ........................... 32 mm
Weight: ............................................ 3090 g (without drive battery)
Low deviations in dimensions and weight are due to production technical reasons.
Four wheel drive via cardan shaft
Ball-bearing drive
Differential in front and rear axles, middle differential
Front and rear axle track can be set
Front and rear axle camber can be set
65

Advertisement

Table of Contents
loading

This manual is also suitable for:

40 95 98

Table of Contents