Technical Data - Reely ROAD 1:10 GP Chassis P-190 4WD Operating Instructions Manual



12. Technical data

Engine:
Combustion engine:
Cubic capacity:
Power:
Engine speed:
Borehole:
Lift:
Fuel:
Tank capacity:
Lubrication
Air filter:
Power transmission:
All-wheel drive:
Chassis: P-190
Undercarriage:
Front wheel suspension:
Rear wheel suspension:
Brakes:
Suspension:
Servo saver:
Tyres:
Dimensions and weight:
Length:
Width:
Height:
Wheel track
Wheel base:
Weight:
62
FORCE 17ZS with side exhaust, ABC running equipment, slide carburettor, two-chamber resonance sound absorber
2.76 cc
1.25 kW / 1.7 PS by 28,000 rpm/min
2,000 - 30,000 rpm
16 mm
13.7 mm
RC car model fuel on methanol/oil basis, minimum share of 5% - 25% nitromethane and 16% synthetic oil
100 cc
Self-lubricating
Dry foam filter, dismountable
Via cardan shafts to front and rear axles
Enclosed differential in the front and rear axle
All drive axles are mounted with ball bearings
Aluminium chassis, shock absorber bridges, aluminium RC installation plate.
Twin control arm suspension
Straining screw in the top transverse control arm, camber adjustable
Axle leg front: Light alloy cast
Twin control arm suspension
Straining screw in the top transverse control arm, camber adjustable
Disk brakes with aluminium brake disks Special brake lining on rear axle drive and the front axle drive
Spring struts with aluminium oil pressure shock absorbers, spring preload adjustable via knurled nut
Adjustable
Front/rear: Complete wheels (high grip), glued ready for driving, width: 27 mm, Ø 69 mm
398 mm
185 mm
93 mm
158 mm
260 mm
1355 g (ARR version) / 1495 g (RtR version)