Localisation Settings (Coordinate Systems) - Leica iCON grade iCP42 User Manual

iCON grade iCP42, 3D Run Mode
4.17

Using localisation in
iCON 3D LOK format
Using predefined coor-
dinate systems

Localisation Settings (Coordinate Systems)

A localisation is the transformation from global to a local coordinate system and is carried
out in iCON 3D. When using the PowerBox, the localisation can be done directly in the
PowerBox. When using iCON gps 80, localisation must be done in iCON 3D.
1. Transfer the LOK file to the current project for
example via USB.
2. Go to Settings > Localisation.
3. Select the appropriate Localisation from the list.
If a geoid model is used by the LOK file, it should be
saved in the global folder. Refer to "Transferring a
geoid model to the system", page 100, for more
information.
Several national/regional coordinate systems are preinstalled.
1. Go to Settings > Localisation > Predefined.
2. Select Country/region and Coordinate system.
3. To use a geoid model, check the Use Geoid
model box and select the appropriate file.
The geoid model must be stored in the global folder.
Refer to "Transferring a geoid model to the system",
page 100, for more information.
96