Table of Contents
Advertisement
iCON grade iCP42, Operation
3.9
Enter the Sensor Cali-
bration Wizard
Sensor Calibration
1. step
Sensor Calibration Wizard
In order to maintain the correct calibration of the sensors, the Sensor Calibration Wizard
should be run periodically due to blade wear. This should also be done when changing
the blade wear edges or changing tires on a grader, as this will change the mainfall slope.
This is done by entering the calibration wizard:
Menu -> Calibration -> Sensor Calibration
and following the on-screen instructions.
Select the Sensor Calibration. Follow the on-screen instructions to calibrate each sensor.
The following example is for graders, but the dozer sensor calibration is similar.
50
Advertisement
Table of Contents
