Using The Mus1300 Tri-Sonic Sensor - Leica iCON grade iCP42 User Manual

3.4
Using Tri-Sonics
iCON grade iCP42, Operation

Using the MUS1300 Tri-Sonic Sensor

The Tri-Sonic can also measure the horizontal distance to a stringline and therefore it can
be used to control the sideshift on a grader.
To do that, complete the following steps:
1. Place the machine so that the Tri-Sonic is above ground, the edge or stringline. The
sensor needs an edge or string to follow before it can control the sideshift.
2. Move the blade to the working position.
3. Move the Tri-Sonic to a good working height. This is approximately 60 cm above the
reference.
4. Select the Tri-Sonic on the same side as where it is placed on the machine.
5. Enter the Tri-Sonic menu. First press the key, then press the Adjust function key.
31