Storing Points - Leica iCON grade iCP42 User Manual

4.2

Storing points

iCON grade iCP42, 3D Run Mode
Storing Points
1. Press Tools.
2. Select Store point options.
3. Select the Coordinate file you wish to store the
measured points in.
4. Enter a Point name. Point numbers automatically
increase by one when a point has been stored.
5. Press Measure to store the blade reference
point.
The colour of this key corresponds to the position
quality. The key is green when the position quality
is good and red when it is low. In the latter case
the function can't be used.
6. Check the Show in run window box to use the
Measure key directly in run mode.
Pressing this key will bring up the selected coordinate file in the plan view as a help
model. Measured points are displayed in plan view.
Press this key to create a new coordinate file.
59