Blade Rotation On Dozer - Leica iCON grade iCP42 User Manual

3.1.6
Dozer blade rotation
with cross slope sensor
iCON grade iCP42, Operation

Blade rotation on Dozer

For Dozer systems that use a cross slope sensor you must make sure that the blade is
square to the machine (not rotated).
Dozer blade square
Operating with a rotated blade can cause inaccuracy in the cross slope being cut.
When driving on a surface that has 0% cross slope and 0% long slope, the blade can be
rotated freely.
The bigger cross slope and long slope you are working with, the bigger the error on a rotated
blade will be.
Dozer blade rotated
23