3.6
Introduction
Enabling the SP14
Sensor
iCON grade iCP42, Operation
SP14 Sensor
The SP sensor is a new technology in machine automation. It improves smoothness obtained
with GPS, PowerTracker and laser reference sensors. In addition, the dozer can be operated
with increased speed compared to a system without SP technology.
The SP Technology can only be used on Dozers with the Control Box iCP42, together with
PowerBox, iCON gps 80, or PowerTracker.
The SP Technology MUST be turned off when using the SP14 sensor together with a laser or
sonic sensor.
SP functionality can be enabled or disabled in the tech-mode.
43