Avoidance Zones - Leica iCON grade iCP42 User Manual

iCON grade iCP42, 3D Run Mode
4.4
Description of avoid-
ance zones
Options in avoidance
zones

Avoidance zones

Avoidance zones are areas you can specify to give a visual alarm when entered.
In an avoidance zone no guidance nor automatic control is possible.
For avoidance zones, the following characteristics apply:
• An avoidance zone is a geo file that is created in iCON office.
• The avoidance zone must be a closed polygon.
• The avoidance zone geo file must be placed in the project.

The Avoidance zone geo file must not contain points, lines that are not closed, lines
with radius or lines that intersect.
In the avoidance zone menu you will find various options. You will have to make selections
according to how you want to use avoidance zones.
Below you will find a description of the options in avoidance zones:
Type
1. Select Avoidance zones model on the drop down list.
Model
1. Select the avoidance zone in the drop down list you want to use, and mark the check
box On/Off. You will now see the selected model in Active models.
66