Hold Slope - Leica iCON grade iCP42 User Manual

4.11.2
Possibilities to hold a
slope
iCON grade iCP42, 3D Run Mode

Hold Slope

This functionality requires a centre line being selected in the reference model settings.
There's two ways to hold the cross slope in a terrain model:
• From centre line
The slope is calculated between two points 25 cm on each side of the Hold slope distance
in the current cross section.
• User-defined
a
b
a
b
a) Hold slope distance from centre
line
b) Centre line
a) The slope is constant and inter-
sects the centre line at the same
height as the reference model
intersects it.
b) Centre line
79