Blade Wear Compensation - Leica iCON grade iCP42 User Manual

iCON grade iCP42, 3D Run Mode
4.8
Description
3. At Blade Ref. point select Left, Centre or Right.
4. At Hydraulic control point select Left, Centre
or Right.
5. The ? button opens up a help text explaining the
functionalities.
6. Return to run screen by pressing
It is also possible to change the reference points
using the foil on the screen when the 3D run screen
is active.
• Pressing the or
reference point.
• Pressing arrow up or down changes the Blade
reference point.

Blade wear compensation

It is possible to adjust the blade height as the blade wears down. This can be done either by
manually measuring the blade height and enter the value, or automatically by placing the
blade over a point with known height and let the system calculate the value.
.
key changes the Hydraulic
72