iCON grade iCP42, 3D Run Mode
4.12
4.12.1
Selecting a guide line
Working with MBS (Volume Calculation Model)
Selecting a Guide Line
1. Press Tools.
2. Select Guide line options.
3. Check the box to the right of Guide line.
4. Select guide line as: Centre line, Closest
element or Horizontal intersection.
5. By entering a value for Horiz. offset, the line will
move horizontally.
6. Press Match to set the horizontal offset to the
blade reference point's current distance from the
Guide line.
7. Use the Back key
to return to run mode.
82