Network Card Configuration Wizard - Gamatronic uPS 3:3 Phase Series User Manual And Instruction Manual

Gamatronic Electronic Industries Ltd.
10.3.3

Network Card Configuration Wizard

To configure the communications card, use the Network Card Configuration Wizard
program, and follow the installation instructions displayed on the screens. This
program is located on the GMaC diskette and is automatically activated when the
diskette is inserted in the computer drive.
Note: The card contains the following factory-set network settings, which you can
change when configuring the card:
•
IP address: 192.168.0.182
•
Gateway: 192.168.0.254
•
Mask: 255.255.255.0
To Configure the Network Card:
Follow the instructions on each of the following screens. After filling in the fields
with the appropriate information, click Next to continue to the next screen.
Screen 1: Welcome
This screen appears when
the program opens.
(Note: If you click the
View Last Known
Configuration button, a
window appears
containing the last IP
gateway and mask that
was sent by the program
to GMaC.)
µPS Series 3:3 Phase 10kVA (GEMS)
User Guide
Page 55