Setting The Real-Time Clock - Gamatronic uPS 3:3 Phase Series User Manual And Instruction Manual

User Guide

5.2 Setting the Real-Time Clock

The real-time clock is composed of the date and time fields and may be set by
the user. The date field contains three sub fields (DD/MM/YY) and the time
field contains two sub fields (HH:MM).
To set the real-time clock:
Press the TIME button to enter
1.
the time mode. The normal
TIME display is shown on the
LCD panel.
Press the SET button to initiate
2.
the time setting mode.
Note that the
flashing field
indicator
automatically
positions itself
under the date's DD field.
If necessary, continue pressing the SET button to increase the selected
3.
field.
Use the arrow buttons (UP and DOWN) to position the cursor beneath the
4.
next field to be changed.
Repeat steps 3-4 for each field to be changed.
5.
Press the STAT button to exit the time-setting mode.
6.
Page 36
Gamatronic Electronic Industries Ltd.
Flashing
Field
Indicator
µPS Series 3:3 Phase 10kVA (GEMS)