Communications; Rs232 Interface; Figure 20: Local Direct Connection - Gamatronic uPS 3:3 Phase Series User Manual And Instruction Manual

Gamatronic Electronic Industries Ltd.

6. COMMUNICATIONS

The UPS can be connected to a computer or a modem using a shielded cable, with an
RS232C–D-type 9-pin female connector. The maximum-allowed cable length is 15
meters.
There are two types of UPS connections:
• Directly to a host computer with dedicated software.
• Remote control through an SNMP/WEB management program for computer
network communications.

6.1 RS232 Interface

The UPS supports standard RS232 protocol. Full information about the status of the
UPS, the value of its parameters, and the memory events log is displayed on a user-
friendly graphic interface. The graphic interface also allows you to use the host
computer to execute a set of instructions for the UPS that includes shutdown, restart,
battery check, etc.
µPS Series 3:3 Phase 10kVA (GEMS)

Figure 20: Local Direct Connection

User Guide
Page 40