Equipment Location; Elect R Ical Wiring; Seismic Anchoring Kit (Optional); Table 1: Dimensions & Weights - Gamatronic uPS 3:3 Phase Series User Manual And Instruction Manual

User Guide
Height
Width
Depth
Weight (with batteries)
Dissipation (W) at full load (1W = 3.4 Btu)
3.2.2

Equipment Location

Castors on the unit ease final positioning.
1.
As with all electrical equipment, installation and serviceability will
2.
be easier if access is provided on all sides of the equipment.
Verify adequate clearance around cabinet to allow unrestricted
3.
exhaust air to flow (12 inches minimum).
Verify that the UPS system is installed in a clean, cool, and dry
4.
location.
3.2.3 Elect
Verify that power wiring is run in an individual separate conduit or
1.
cable tray. Verify that control wiring is run in an individual separate
conduit.
For minimum conductor size, refer to Table 2 on page 11, which has
2.
been prepared in accordance with NEC requirements. (Please check
your local electrical codes to ensure compliance with the given grades.)
3.2.4

Seismic Anchoring Kit (Optional)

An optional seismic anchoring kit is available for the UPS that provides
protection against earthquakes when using the UPS in areas subject to seismic
events. The kit enables you to securely anchor the UPS to the floor, in
compliance with federal recommendations for bracing heavy equipment in
earthquake zones.
When installing the seismic anchoring kit, the following site considerations
should be met:
The UPS should be anchored to a solid concrete floor that is strong
1.
enough to support the anchor bolts.
The surface to which the UPS is anchored should be free of interference
2.
from utility supplies or electrical conduits.
Page 10
Table 1: Dimensions & Weights
DIMENSIONS & WEIGHTS
µPS Series 3:3 Phase, 10kVA, GE Model
r ical Wiring
r
Gamatronic Electronic Industries Ltd.
µPS Series 3:3 Phase 10kVA (GEMS)
38 in (95 cm)
16.4 in (41 cm)
33.6 in (84 cm)
638 lb (290 kg)
880W (2992 Btu)