Canon 2213C002 Instruction Manual page 66

Image Stabilization
NOTES NOTES
• The angle of view will change when [Image Stabilizer] is set to [Ä Dynamic].
• If the degree of camcorder shake is too high, the image stabilizer may not be able to compensate fully.
66
• Powered IS is available even when [Image Stabilizer] is set to [Ì Off].
• You can change the operation of the POWERED IS button (long press or toggle on/off) with the [v Camera
Setup] > [Powered IS Button] setting.
• When using Dynamic IS, the edges of the picture may be adversely affected (ghosting, artifacts and/or dark
areas may appear) when compensating for a high degree of camcorder shake.