Copying Clips And Photos - Canon 2213C002 Instruction Manual

4k camcorder
Table of Contents

Advertisement

Copying Clips and Photos

You can copy clips and photos from one SD card to the other.
Operating modes:
Copying Clips and Photos from the Index Screen
1 Open the desired index screen (A 109).
• To copy all the MP4 clips or photos recorded on the same date (saved in the same folder), drag your finger
left/right until an MP4 clip or photo you want to copy appears.
2 Select [Copy (6'7)] or [Copy (7'6)].
[FUNC] > [Copy (6'7)] or [Copy (7'6)]
3 Touch the desired option and then touch [Yes].
• When you select [Select], perform the following procedure to select the individual recordings you want to
copy before touching [Yes].
• Touch [Stop] to interrupt the operation while it is in progress.
4 When the confirmation message appears, touch [OK].
To select individual recordings
1 Touch on the individual clips/photos you want to copy.
• A checkmark ! will appear on the recordings you touch. The total number of selected clips/photos will
appear next to the " icon.
• Touch a selected clip or photo to remove the checkmark. To remove all checkmarks at once, touch [Remove
All] > [Yes].
2 After selecting all the desired recordings, touch [OK].
Options
<folder name>: Copies all the MP4 clips or photos recorded on a particular date. The last 4 digits of the folder
name in the button indicate the recording date (1103 = November 3).
[Select]:
You can select the individual clips or photos you want to copy.
[All Clips], [All Photos]:
Copies all the clips or photos.
Copying a Single Photo
1 Play back the desired photo (A 110).
2 Touch the screen to display the playback controls and then copy the photo.
[FUNC] > [Copy (6'7)] or [Copy (7'6)] > [¨ Proceed] > [Yes]
3 Drag your finger left/right to select another photo to copy or touch [X].
IMPORTANT
• Observe the following precautions while the ACCESS indicator is illuminated in red. Failing to do so may result
in permanent data loss.
- Do not open the SD card compartment cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder's operating mode.
Clip and Photo Operations
115

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xf405Xf400

Table of Contents