Canon 2213C002 Instruction Manual page 120

Connecting to an External Monitor or Recorder
NOTES
• m The camcorder cannot output signals to the SDI OUT terminal and HDMI OUT terminals
simultaneously.
120
• Depending on the external recorder used, you may not be able to record on the external recorder using the
selected output video configuration.
• After connecting the camcorder to an external recorder, make test recordings using the video configuration(s)
you plan to use and check the recordings made by the external recorder.
• You can set [3 Recording Setup] > [Rec Command] to [i On] to use the camcorder's REC button to
control also the recording operation of external recorders compatible with recording commands.
• About the time code during external recording-only mode:
- The time code mode is automatically set to [
- When the camcorder is set back to internal recording-priority mode, the time code mode will return to its
previous setting.
Using the SDI OUT Terminal
The digital signal that is output from the SDI OUT terminal (m only) includes the video signal, audio signal
(up to 4 channels), time code and recording command. You can output also the onscreen displays (A 153).
Operating modes:
Selecting the Output Terminal
1 Select [Output Terminal].
> [£ ! Display Setup] > [Output Terminal]
2 Activate the SDI OUT terminal and then touch [L].
• Touch [ø SDI] (SDI OUT terminal).
3 Select [3G-SDI Mapping].
> [£ " Display Setup] > [3G-SDI Mapping]
4 Select the desired option and then touch [
• You can select a video output signal compliant with Level A or Level B of the SMPTE ST 425-1 standard.
NOTES
• When slow & fast motion recording is activated, the time code signal cannot be output from the SDI OUT
terminal (m only).
Preset].
X
].