Canon 2213C002 Instruction Manual page 52

Slow & Fast Motion Recording
NOTES NOTES
• Slow & fast motion recording cannot be used together with the following functions.
- Dual recording
52
- Relay recording
• When the slow motion rate is set to x0.5 (59.94P), x0.25 (29.97P) or x0.2 (23.98P), face detection & tracking
cannot be used together with slow & fast motion recording.
• About the time code when slow & fast motion recording is activated:
- The time code mode can be set to [
- If the time code running mode was set to [
automatically to [
- When slow & fast motion recording is turned off, the time code running mode will return to its previous
setting.
- The time code signal cannot be output from the SDI OUT terminal (m only) or HDMI OUT terminal.
• The maximum continuous recording time of a single clip using slow motion recording is the equivalent of 6
hours of playback time. Consequently, it differs depending on the slow motion rate used. For example, when
the [x0.5] rate is selected, the maximum continuous recording time will be 3 hours (which, played back at x0.5
slow motion, equal 6 hours of playback time).
- Pre-recording
- Color bars
Regen.], or to [
Rec Run] when slow & fast motion recording is activated.
Preset] with [
Free Run], the time code running mode will be changed
Rec Run] running mode.