Table of Contents
Advertisement
7
About the Network Functions
You can connect the camcorder to a wireless network using Wi-Fi (A 127) or to a wired network using an
Ethernet cable (A 133). Once the camcorder is correctly connected to a network, you can use the following
network functions.
Network functions and connection types
Network function
Control the camcorder remotely from the Web
Browser Remote
browser of a connected device.
Stream the camcorder's live video and audio
IP Streaming
over IP to a compatible IP video decoder
connected to network.
Transfer clips recorded with the camcorder to
FTP File Transfer
another device connected to the network using
the FTP protocol.
1
Connection to a Wi-Fi network via an external access point (wireless router, etc.)
2
Direct connection to one Wi-Fi-enabled device where the camcorder itself serves as the Wi-Fi access point.
Before using the network functions
• The instructions in this chapter assume you already have a correctly configured and working network, network
device(s) and/or Wi-Fi access point. If necessary, refer to the documentation provided with the network
devices you plan to use.
• Configuring the network settings requires adequate knowledge about configuring and using wired (Ethernet)
and/or wireless (Wi-Fi) networks. Canon cannot provide support regarding network configurations.
IMPORTANT
• Data transmitted over networks is not encrypted.
• Canon shall not be liable for any loss of data or damage resulting from incorrect network configuration or
settings. Additionally, Canon shall not be liable for any loss or damage caused by the use of network functions.
• Using an unprotected Wi-Fi network can expose your data to monitoring by unauthorized third parties. Be
aware of the risks involved.
Description
Network Functions
Wi-Fi
Wired
Camera Access
1
network
Infrastructure
Ü
–
Ü
–
Ü
Ü
125
A
2
Point
Ü
135
–
143
–
145
Advertisement
Table of Contents
