Canon 2213C002 Instruction Manual page 131

Searching for Access Points
The camcorder will automatically detect access points in the vicinity. After you select the desired access point,
you only need to enter the selected network's password to connect the camcorder. For details about the access
point's network name (SSID) and password, refer to the wireless router's instruction manual or consult the
network administrator in charge of the access point.
1 After you select [Search for Access Points], the camcorder will search for active access points in the
vicinity and display a list of available options on the screen.
2 Touch the desired access point.
• Drag your finger up/down or touch [Í]/[Î] to scroll up/down.
• If the access point is not encrypted (C icon is not displayed), continue with the procedure to configure the IP
address assignment (A 129).
3 If necessary (depending on the access point's encryption), touch one of the buttons to select the
WEP index.
4 Enter the encryption key (password).
[Edit] > Enter the password using the keyboard screen (A 128) > [OK]
5 Continue with the procedure to configure the IP address assignment (A 129).
Network name (SSID)
Connecting to a Wi-Fi Network
Encrypted access point
Current access point/Total number
of active access points detected
131